spec no: dsad1090 rev no: v.2 date: dec/29/2003 page : 1 of 5 approved: j. lu checked: allen liu drawn: s.j.hou package dimension s notes: 1. all dimensions are in millimeters (inches). 2. tolerance is 0.15(0.006") unless otherwise noted. 3. specifications are subject to change without notice. description the hyper red source color devices are made with dh ingaalp on gaas substrate light emitting diode. the super bright green source color devices are made with gallium phosphide green light emitting diode . APBA3010SURKSGC hyper red super bright green 3.0mmx1.0mm right angle smd chip led lamp features 3.0mmx1.0mm right angle smt led, 2.0mm thickness. low power consumption. wide viewing angle. ideal for backlight and indicator. various colrs and lens types available. package : 2000pcs / reel.
spec no: dsad1090 rev no: v.2 date: dec/29/2003 page : 2 of 5 approved: j. lu checked: allen liu drawn: s.j.hou selection guid e note: 1. 1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. part no. dice lens type iv (mcd) @ 20ma viewing angle min. typ. 2 1/2 APBA3010SURKSGC hyper red (ingaalp) water clear 110 200 super bright green (gap) 2.6 12 140 electrical / optical characteristics at t a =25 c absolute maximum ratings at t a =25 c note: 1. 1/10 duty cycle, 0.1ms pulse width. symbol parameter device typ. max. test conditions units peak peak wavelength hyper red super bright green 650 565 nm i f =20ma d dominate wavelength hyper red super bright green 635 568 nm i f =20ma ? 1/2 spectral line half - width hyper red super bright green 28 30 nm i f =20ma c capacitance hyper red super bright green 35 15 pf v f =0v;f=1mhz v f forward voltage hyper red super bright green 1.95 2.2 2.5 2.5 v i f =20ma i r reverse current all 10 ua v r = 5v parameter hyper red super bright green units power dissipation 170 105 mw dc forward current 30 25 ma peak forward current [1] 185 140 ma reverse voltage 5 5 v operating / storage temperature - 40c to +85c
spec no: dsad1090 rev no: v.2 date: dec/29/2003 page : 3 of 5 approved: j. lu checked: allen liu drawn: s.j.hou APBA3010SURKSGC hyper red
spec no: dsad1090 rev no: v.2 date: dec/29/2003 page : 4 of 5 approved: j. lu checked: allen liu drawn: s.j.hou super bright green
spec no: dsad1090 rev no: v.2 date: dec/29/2003 page : 5 of 5 approved: j. lu checked: allen liu drawn: s.j.hou recommended soldering pattern (units : mm ) tape specifications (units : mm ) APBA3010SURKSGC smt reflow soldering instructions number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process.
|
